Vacuum formed hoppers in 4 mm recycled HDPE for vending and kiosk: process, tooling, tolerances from 4 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed ventilation shrouds in 1.5 mm ABS for dental equipment: process, tooling, tolerances from 1.5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed hoppers in 5 mm PC/ASA for catering and kitchen equipment: process, tooling, tolerances from 5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed cable covers in 2 mm ABS for refrigeration: process, tooling, tolerances from 2 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed light housings in 5 mm UV stabilised HDPE for HVAC equipment: process, tooling, tolerances from 5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed instrument bezels in 4 mm TPO for aerospace interiors: process, tooling, tolerances from 4 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed hoods in 1.5 mm polypropylene for battery energy storage: process, tooling, tolerances from 1.5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed fenders in 5 mm PC/ASA for HVAC equipment: process, tooling, tolerances from 5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed component trays in 6 mm ABS for refrigeration: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed splash guards in 3 mm HDPE for aerospace interiors: process, tooling, tolerances from 3 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed cowls in 6 mm PETG for truck and bus: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed tank liners in 4 mm PMMA acrylic for solar and wind energy: process, tooling, tolerances from 4 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
