Vacuum formed fenders in 2 mm ABS/PC for water treatment: process, tooling, tolerances from 2 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed machine housings in 6 mm PETG for refrigeration: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed door panels in 6 mm LDPE for truck and bus: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed cable covers in 8 mm ABS/PMMA for beauty and spa equipment: process, tooling, tolerances from 8 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed access panels in 6 mm TPO for solar and wind energy: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed splash guards in 10 mm HIPS for battery energy storage: process, tooling, tolerances from 10 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed dashboards in 6 mm ABS for EV charging: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed machine housings in 5 mm ASA for industrial robotics: process, tooling, tolerances from 5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed door panels in 1.5 mm food grade polypropylene for material handling: process, tooling, tolerances from 1.5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed storage bins in 10 mm ABS/PMMA for vending and kiosk: process, tooling, tolerances from 10 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed hoods in 8 mm HDPE for medical equipment: process, tooling, tolerances from 8 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed instrument bezels in 12 mm TPO for agricultural machinery: process, tooling, tolerances from 12 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
