Vacuum formed carry cases in 12 mm HIPS for fitness equipment: process, tooling, tolerances from 12 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed light housings in 3 mm UV stabilised HDPE for hydroponics and greenhouse: process, tooling, tolerances from 3 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed cowls in 2 mm PVC for fitness equipment: process, tooling, tolerances from 2 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed tank liners in 8 mm polypropylene for textile machinery: process, tooling, tolerances from 8 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed seat shells in 1.5 mm ABS/PC for refrigeration: process, tooling, tolerances from 1.5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed centre consoles in 6 mm flame retardant ABS for medical equipment: process, tooling, tolerances from 6 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed cowls in 12 mm ASA for EV charging: process, tooling, tolerances from 12 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed component trays in 12 mm PETG for solar and wind energy: process, tooling, tolerances from 12 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed access panels in 1.5 mm ABS for elevator and escalator interiors: process, tooling, tolerances from 1.5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed tank covers in 1.5 mm UV stabilised HDPE for commercial laundry: process, tooling, tolerances from 1.5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed door panels in 5 mm LDPE for ATV and UTV: process, tooling, tolerances from 5 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
Vacuum formed cowls in 12 mm HIPS for ATV and UTV: process, tooling, tolerances from 12 mm sheet, first article in 7-15 days, 5-axis trimming and inspection.
