This guide covers how to calculate scrap rate on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
In vacuum forming and thermoforming, sheet drying is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what i
UV stabilised HDPE and standard HDPE are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The
This guide covers how to specify wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
This guide covers how to quote first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before
In vacuum forming and thermoforming, laser marking is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what
This guide covers how to choose draw ratio on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to calculate sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to plan cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to reduce texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to specify sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to choose mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
