This guide covers how to avoid first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before
This guide covers how to maintain tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to compare tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
HIPS and ABS are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The comparison below is the
This guide covers how to avoid surface finish on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
insert moulding and post moulded inserts are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.
This guide covers how to design corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
This guide covers how to measure packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
