In vacuum forming and thermoforming, snap fit design is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wha
This guide covers how to avoid packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
In vacuum forming and thermoforming, impact modification is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains
This guide covers how to troubleshoot tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too
This guide covers how to compare texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to design insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli
In vacuum forming and thermoforming, mould texture is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what
In vacuum forming and thermoforming, nesting for trimming is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explain
In vacuum forming and thermoforming, draft angle is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it
This guide covers how to improve lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
PETG and polycarbonate are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The comparison be
UV stabilised HDPE and standard HDPE are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The
