This guide covers how to specify insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool
In vacuum forming and thermoforming, post forming shrinkage is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry expla
This guide covers how to trim gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is c
In vacuum forming and thermoforming, texture depth is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what
painted finish and textured sheet are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The co
This guide covers how to maintain insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too
This guide covers how to trim wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to compare gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to choose lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is c
This guide covers how to control trim tolerance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
In vacuum forming and thermoforming, assembly inserts is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh
This guide covers how to validate draw ratio on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
