vacuum forming and fibreglass lay-up are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The
This guide covers how to calculate colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before
This guide covers how to control lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
vacuum forming and injection moulding are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. Th
This guide covers how to quote shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too
This guide covers how to quote part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
3D printed tooling and aluminium tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.
This guide covers how to compare insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool
This guide covers how to quote sheet heating on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to choose sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to specify part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to avoid insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
