Vacuum Forming vs Thermoforming

3D printed tooling and aluminium tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.

In vacuum forming and thermoforming, silk screen printing is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explain

This guide covers how to calculate shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before

This guide covers how to quote tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to choose sheet heating on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to troubleshoot corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before

This guide covers how to specify wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to compare rib layout on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to control shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before t

This guide covers how to maintain insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too

This guide covers how to measure lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to calculate rib layout on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling