PETG vs Acrylic in Vacuum Forming

This guide covers how to compare rib layout on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to trim shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

This guide covers how to control draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to maintain mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

In vacuum forming and thermoforming, part marking is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what i