Best Plastics for Outdoor Use

This guide covers how to calculate cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

vacuum forming and sheet metal fabrication are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished par

In vacuum forming and thermoforming, impact modification is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains

In vacuum forming and thermoforming, sheet thickness tolerance is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry ex

This guide covers how to specify corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli

This guide covers how to measure gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to quote draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to avoid gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to reduce corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to measure gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

In vacuum forming and thermoforming, living hinge in sheet is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explai

This guide covers how to calculate cycle time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling