Home / Wikipedia / 3. Design and Engineering / Thermoforming Design Guide /
In vacuum forming and thermoforming, coextruded sheet is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh
This guide covers how to design surface finish on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
In vacuum forming and thermoforming, coextruded sheet is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh
In vacuum forming and thermoforming, wall thickness distribution is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry
This guide covers how to specify draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
local tooling and imported tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The c
This guide covers how to compare wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
This guide covers how to plan part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to improve mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
In vacuum forming and thermoforming, dimensional report is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains
This guide covers how to choose shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to
This guide covers how to quote wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
