Wall Thickness of Thermoformed Parts

ABS and polycarbonate are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The comparison bel

This guide covers how to avoid mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to avoid tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

UV stabilised HDPE and standard HDPE are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The

This guide covers how to specify first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems befor

This guide covers how to specify part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to design corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to measure corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli

This guide covers how to measure first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems befor

This guide covers how to reduce wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to choose batch repeatability on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

This guide covers how to design gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is