Home / Wikipedia / 3. Design and Engineering / Wall Thickness of Thermoformed Parts /
aluminium tooling and composite tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.
In vacuum forming and thermoforming, colour matching is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wha
This guide covers how to avoid tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to maintain gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to compare trim tolerance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
In vacuum forming and thermoforming, living hinge in sheet is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explai
This guide covers how to compare tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to choose insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli
This guide covers how to control first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems befor
This guide covers how to validate insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too
This guide covers how to troubleshoot cycle time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli
aluminium tooling and composite tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.
