Metal to Plastic Conversion Costs

This guide covers how to compare draw ratio on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to compare draw ratio on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to troubleshoot gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

In vacuum forming and thermoforming, flame treatment is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wha

This guide covers how to design colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too

PETG and polycarbonate are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The comparison be

In vacuum forming and thermoforming, draft angle is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it

In vacuum forming and thermoforming, heating cycle is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what

This guide covers how to choose tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to troubleshoot texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

This guide covers how to plan lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is cut

This guide covers how to specify wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin