Metal to Plastic Conversion Costs

This guide covers how to compare sheet heating on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

In vacuum forming and thermoforming, hot wire cutting is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh

This guide covers how to compare sheet material on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to reduce batch repeatability on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

In vacuum forming and thermoforming, bridging is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it me

This guide covers how to compare part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to quote draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to choose trim tolerance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

In vacuum forming and thermoforming, plug assist forming is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains

This guide covers how to control sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

ABS and HDPE are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The comparison below is the

In vacuum forming and thermoforming, first article inspection is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry exp