EV Charger Plastic Enclosures

This guide covers how to design part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to trim wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

UV stabilised HDPE and standard HDPE are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The

3D printed tooling and aluminium tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.

This guide covers how to design packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

In vacuum forming and thermoforming, wall thickness distribution is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry

This guide covers how to quote packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to maintain sheet heating on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to choose sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

In vacuum forming and thermoforming, cooling jig is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it

In vacuum forming and thermoforming, pressure forming is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh

This guide covers how to validate lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is