EV Charger Plastic Enclosures

wall thinning at corners is one of the faults that shows up during sampling on any new thick gauge tool. It is visible on the part, but the cause is usually in the mould, the heating cycle o

This guide covers how to trim texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to troubleshoot sheet material on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before t

This guide covers how to trim cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to plan corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to quote shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too

In vacuum forming and thermoforming, threaded inserts is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh

This guide covers how to trim texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

In vacuum forming and thermoforming, solvent bonding is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wha

In vacuum forming and thermoforming, impact modification is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains

This guide covers how to plan part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to improve surface finish on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin