EV Charger Plastic Enclosures

This guide covers how to improve rib layout on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

In vacuum forming and thermoforming, cap layer is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it m

This guide covers how to reduce wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to control shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before t

This guide covers how to design gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

HDPE and polypropylene are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The comparison be

This guide covers how to calculate wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

This guide covers how to troubleshoot sheet heating on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

3D printed tooling and aluminium tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part.

This guide covers how to measure first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems befor

This guide covers how to specify wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to calculate rib layout on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling