EV Charger Plastic Enclosures

wall thinning at corners is one of the faults that shows up during sampling on any new thick gauge tool. It is visible on the part, but the cause is usually in the mould, the heating cycle o

This guide covers how to choose cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to choose batch repeatability on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

This guide covers how to quote insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to reduce mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

In vacuum forming and thermoforming, 5 axis routing is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what

This guide covers how to specify draw ratio on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to avoid sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

In vacuum forming and thermoforming, ultrasonic welding is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains

This guide covers how to quote colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

This guide covers how to reduce sheet material on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

In vacuum forming and thermoforming, corner radius is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what