Packing and Shipping Process

solvent bonding and ultrasonic welding are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. T

This guide covers how to maintain wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli

This guide covers how to plan packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

In vacuum forming and thermoforming, tooling amortisation is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explain

In vacuum forming and thermoforming, prototype tooling is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains w

This guide covers how to troubleshoot wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before t

In vacuum forming and thermoforming, regrind content is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wha

In vacuum forming and thermoforming, UV stability of sheet is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explai

drape forming and plug assist forming are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. Th

This guide covers how to troubleshoot cycle time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli

scorched sheet surface is one of the faults that shows up during sampling on any new thick gauge tool. It is visible on the part, but the cause is usually in the mould, the heating cycle or

This guide covers how to trim first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before t