This guide covers how to reduce gloss level on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to calculate wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool
This guide covers how to compare mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to avoid packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
In vacuum forming and thermoforming, impact modification is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains
In vacuum forming and thermoforming, cap layer is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it m
In vacuum forming and thermoforming, laser marking is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what
This guide covers how to specify colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to
This guide covers how to calculate cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool
This guide covers how to quote mould venting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to compare draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
UV stabilised HDPE and standard HDPE are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The
