This guide covers how to specify draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i
This guide covers how to quote packing method on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
In vacuum forming and thermoforming, flame treatment is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wha
This guide covers how to troubleshoot colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems befo
In vacuum forming and thermoforming, bridging is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it me
In vacuum forming and thermoforming, tolerance stack up is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains
local tooling and imported tooling are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The c
This guide covers how to trim batch repeatability on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool
This guide covers how to validate lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to compare part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to specify fixture design on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
In vacuum forming and thermoforming, living hinge in sheet is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explai
