This guide covers how to quote tooling cost on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to choose shrinkage allowance on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to
In vacuum forming and thermoforming, corner radius is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what
pressure forming and vacuum forming are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. The
In vacuum forming and thermoforming, draft angle is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what it
This guide covers how to measure cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin
This guide covers how to specify colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to
This guide covers how to avoid sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to specify draw ratio on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
This guide covers how to quote wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to control texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling
This guide covers how to control lead time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is
