Thermoforming Factory Tour

solvent bonding and ultrasonic welding are both used on the same kind of plastic parts, and the choice between them changes tooling cost, lead time and the properties of the finished part. T

This guide covers how to quote sheet material on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to trim draft angle on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is c

This guide covers how to quote corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to control colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

This guide covers how to measure insert placement on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

This guide covers how to specify sheet grade on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to design corner strength on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before toolin

This guide covers how to choose sheet material on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

This guide covers how to maintain fixture design on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooli

This guide covers how to quote batch repeatability on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before too

This guide covers how to reduce cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling