Thermoforming Factory Tour

This guide covers how to design wall thickness on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

In vacuum forming and thermoforming, mould venting is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains what

This guide covers how to maintain scrap rate on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to avoid texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i

This guide covers how to avoid colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tool

This guide covers how to compare colour consistency on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before to

In vacuum forming and thermoforming, threaded inserts is one of the variables that decides whether a part comes off the machine within tolerance or has to be reworked. This entry explains wh

This guide covers how to plan part nesting on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling is

This guide covers how to control texture depth on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling

post forming shrinkage is one of the faults that shows up during sampling on any new thick gauge tool. It is visible on the part, but the cause is usually in the mould, the heating cycle or

This guide covers how to reduce first article approval on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before

This guide covers how to plan cool down time on a vacuum formed part: what the designer has to decide, what the mould maker needs to know, and the checks that catch problems before tooling i